- Laboao
- 3L rotary evaporator with bath lift
3L rotary evaporator with bath lift
Update Terakhir
27 / 10 / 2021
Min. Pembelian
1 Unit
Harga
CALLBagikan
Dengan hormat, Kami PT.Mitra Katiga Sejahtera menjual alat laboratorium lingkungan.
I. STAPLEX, SHINAGAWA, NOVA GAS, DELTA OHM,LABTRON,TURNKEY INSTRUMENTS,HAZ DUST
E INSTRUMENT , EPAM-5000 ENVIRONMENTAL DEVICE , LABNICS,GOLD,AIRMETRIC,ASSEMBLAD,ANAPOL,ZHONGAN,KOMYO KITAGAWA,JXCT,TRAWAS
www.mitrakatigasejahtera.com
I. STAPLEX, SHINAGAWA, NOVA GAS, DELTA OHM,LABTRON,TURNKEY INSTRUMENTS,HAZ DUST
E INSTRUMENT , EPAM-5000 ENVIRONMENTAL DEVICE , LABNICS,GOLD,AIRMETRIC,ASSEMBLAD,ANAPOL,ZHONGAN,KOMYO KITAGAWA,JXCT,TRAWAS
www.mitrakatigasejahtera.com
Perhatian !
Perusahaan ini terdaftar sebagai Free Member. Hindari melakukan pembayaran sebelum bertemu penjual atau melihat barang secara langsung. COD (Cash On Delivery) atau bertemu langsung dengan penjual merupakan metode transaksi aman yang kami sarankan.
Detail 3L Rotary Evaporator With Bath Lift
Rotary Evaporator
3L rotary evaporator with bath lift
Rotary evaporator is a device used in chemical laboratories for the efficient and gentle removal of solvents from samples by evaporation.
DESCRIPTION
Rotary evaporator is the necessary basic instrument for chemical industry, medicine industry, institutions of higher learning and scientific research laboratory and other units, it is the main means for manufacturing and analyzing experiments when they do extraction and concentration.
FEATURES
1. The parts in contact with materials are all made of high borosilicate glass (expansion coefficient 3.3) and polytetrafluoroethylene materials, which are stable in performance and difficult to chemically react with materials.
2. The main frame is made of cold plate anti-corrosion spray + aluminum alloy material, and the pot is made of stainless steel.
3. The sealing system adopts PTFE + fluorine rubber compound combination seal.
4. The vacuum pressure gauge displays real-time vacuum and the pointer displays.
5. The piston-type feeding valve is sleeved with the PTFE extension tube, which can continuously feed to the evaporating flask under vacuum.
6. One-piece condenser, upright double-layer serpentine coil.
7. Rotating and heating power switch control, tilt button (ON-OFF)
8. Electronic stepless speed regulation, fine-tuning by twisting, digital display of speed.
9. Digital display of temperature of constant temperature bath, K-type sensor at the bottom of the pot + stainless steel probe.
10. The hand wheel of the bath pot is raised and lowered, rotating and heating double fuses for safety protection.
SPECIFICATIONS
Model
LRE-301
Glass material
GG-17
Frame material
Stainless steel
Pot shell Material
Spray anti-corrosion 290*296*240mm
Pot bravery material
Stainless steel 255*170mm
Plate size
350*330mm
Evaporator flask
3L ￠50flange port
Collect flask
2L 35#ball mill port
Vacuum degree
0.098Mpa
Rotary power
40W
Rotary speed
0-120rpm
Heating power
2KW
Heating temperature range
0-400℃
Temp. accuracy
±1℃
Voltage
220V/50Hz
Lifting distance
120mm
Dimension(mm*mm*mm)
660*330*970mm
Packing size(mm*mm*mm)
1000*460*450 0.21CBM
Packing weight（KG）
38
Speed mode
Electronic stepless adjustable speed
Rotor speed display
digital display
Temperature display
K type sensor with digital display
Temperature control
Intelligent temperature control
Sealing method
PTFE sealing
Condenser
vertical condenser100*510mm
Lifting mode
Bath pot manual lifting
Continuous feed
19#standard port feeding valve
Vacuum display
vacuum gauge
Anti-Splash device
Transparent cover for heating bath
Anti-explosion
Explosion-proof inverter, explosion-proof motor EX40W
Frame material optional
Spray or spray PTFE
Tampilkan Lebih Banyak
3L rotary evaporator with bath lift
Rotary evaporator is a device used in chemical laboratories for the efficient and gentle removal of solvents from samples by evaporation.
DESCRIPTION
Rotary evaporator is the necessary basic instrument for chemical industry, medicine industry, institutions of higher learning and scientific research laboratory and other units, it is the main means for manufacturing and analyzing experiments when they do extraction and concentration.
FEATURES
1. The parts in contact with materials are all made of high borosilicate glass (expansion coefficient 3.3) and polytetrafluoroethylene materials, which are stable in performance and difficult to chemically react with materials.
2. The main frame is made of cold plate anti-corrosion spray + aluminum alloy material, and the pot is made of stainless steel.
3. The sealing system adopts PTFE + fluorine rubber compound combination seal.
4. The vacuum pressure gauge displays real-time vacuum and the pointer displays.
5. The piston-type feeding valve is sleeved with the PTFE extension tube, which can continuously feed to the evaporating flask under vacuum.
6. One-piece condenser, upright double-layer serpentine coil.
7. Rotating and heating power switch control, tilt button (ON-OFF)
8. Electronic stepless speed regulation, fine-tuning by twisting, digital display of speed.
9. Digital display of temperature of constant temperature bath, K-type sensor at the bottom of the pot + stainless steel probe.
10. The hand wheel of the bath pot is raised and lowered, rotating and heating double fuses for safety protection.
SPECIFICATIONS
Model
LRE-301
Glass material
GG-17
Frame material
Stainless steel
Pot shell Material
Spray anti-corrosion 290*296*240mm
Pot bravery material
Stainless steel 255*170mm
Plate size
350*330mm
Evaporator flask
3L ￠50flange port
Collect flask
2L 35#ball mill port
Vacuum degree
0.098Mpa
Rotary power
40W
Rotary speed
0-120rpm
Heating power
2KW
Heating temperature range
0-400℃
Temp. accuracy
±1℃
Voltage
220V/50Hz
Lifting distance
120mm
Dimension(mm*mm*mm)
660*330*970mm
Packing size(mm*mm*mm)
1000*460*450 0.21CBM
Packing weight（KG）
38
Speed mode
Electronic stepless adjustable speed
Rotor speed display
digital display
Temperature display
K type sensor with digital display
Temperature control
Intelligent temperature control
Sealing method
PTFE sealing
Condenser
vertical condenser100*510mm
Lifting mode
Bath pot manual lifting
Continuous feed
19#standard port feeding valve
Vacuum display
vacuum gauge
Anti-Splash device
Transparent cover for heating bath
Anti-explosion
Explosion-proof inverter, explosion-proof motor EX40W
Frame material optional
Spray or spray PTFE
