M600L Multi-parameter Analyzer

Multiparameter

M600L Multi-parameter Analyzer
Color High contrast LCD touchscreen, 7.0 inches.
Intelligent operation system provides features including user management, calibration management, method management, data management and etc.
Multi-reading feature allows auto-read, timed-read and continuous-read.
Automatic/Manual temperature compensation ensures accurate results.
Data Storage 1000 sets for each parameter (GLP-compliant).
Data analysis feature helps user review, compare and recalculate results.
Support for USB or RS-232 communication.
Reset feature automatically resumes all settings back to factory default options.
IP54 waterproof.
Support for three modules, namely pH/ISE module, conductivity module and dissolved oxygen module.
Select from three modules to customize the four channels your way.
Four channels can be configured in any combination.


Features of M600L Multi-parameter Analyzer
pH

1-6 points calibration with Standard Recognition.
Selectable pH buffer groups, including NIST, DIN, GB.
Support for pH standard group customization.
Automatic electrode diagnosis with pH slope and offset display.
Ion

1-6 points calibration
Selectable measurement unit, including μg/L, mg/L, g/L, mmol/L, pX, etc.
Multi-measurement modes are supported, including Direct Reading mode, Standard Addition mode, Sample Addition mode and GRAN mode.
Over 10 methods are built-in, including F–, Cl–, Br–, I–, NO3–, BF4–, NH4+, K+, Na+, Ca2+, Cu2+, Pb2+, Ag+ and etc., user-defined method is supported.
Conductivity

1-5 points calibration with Standard Recognition.
Settable parameters, including cell constant, reference temperature (5/10/15/18/20/25°C), temperature compensation coefficient and TDS factor.
Temperature compensation type (none, linear, pure water).
DO

Support for air-saturated water or zero oxygen calibration.
Auto barometric pressure compensation.
Manual Salinity Factor Correction.
Selectable pressure unit, including kPa, mbar, Torr, Atm.
Includes

E-201-L pH composite electrode
PF-202-L Fluoride ion selective electrode
DJS-1-LEC electrode
T-818-L Temperature probe
DO-958-L DO electrode
NIST pH standard solution(4.01, 7.00, 10.01) , 50ml/vial
1413μS/cm EC standard solution, 50ml, 1 vial
REX-3 electrode stand
Touch pen

Specifications of M600L Multi-parameter Analyzer
Model
M600L
Parameters
pH/EC/ISE/DO/Temp. (mV/ORP/pX/Resistivity/TDS/Sal./DO Saturation)
pH
Range
-2.000 to 20.000 pH
Resolution
0.1, 0.01, 0.001pH
Accuracy
±0.002 pH
Calibration Points
Up to 6
Standard Customization
Yes
Calibration Reminder
Yes
Standard Recognition
NIST, GB, DIN buffers
Slope Limit
Yes
mV/ORP
Range
-2000.00 to 2000.00 mV
Resolution
0.1, 0.01 mV
Accuracy
±0.03%FS
EH ORP Mode
Yes
ORP Calibration Points
1~2 custom point (relative mV)
pX
Range
-2.000 to 20.000 pX
Resolution
0.1, 0.01, 0.001 pX
Accuracy
±0.002 pX
Calibration Points
Up to 6
ISE
Range
1.000e-9 to 9.999e+9
Units
mol/L, mmol/L, g/L, mg/L, μg/L
Resolution
Up to 4 significant digits
Accuracy
±0.3%
Calibration Points
Up to 6
Conductivity
Range
0.000 μS/cm to 3000 mS/cm
Resolution
0.001 μS/cm minimum, various with range selection
Accuracy
±0.5% FS
Reference Temperature
5, 10, 15, 18, 20, 25 ºC
Calibration Points
Up to 5
Standard Recognition
146.5μS/cm, 1408μS/cm, 12.85mS/cm, 111.3mS/cm
Resistivity
Range
5.00 Ω·cm~100.0 MΩ·cm
Resolution
0.01 Ω·cm minimum
Accuracy
±0.5% FS
TDS
Range
0.000 mg/L~1000 g/L
Resolution
0.001ppm minimum, changed with range
Accuracy
±0.5% FS
Salinity
Type
NaCl%
Range
(0.00~8.00)%
Resolution
0.01%
Accuracy
±0.1%
Dissolved
Range
0.00 to 99.99 mg/L
Oxygen Concentration – Polarographic
Resolution
0.01 mg/L
Accuracy
±0.1 mg/L
Calibration Reminder
Yes
Calibration Points
Air-saturated water or zero point
Barometric Compensation
Yes
Manual Salinity Factor Correction
Yes
% Saturation -Polarographic
Range
(0.0 to 600)%
Resolution
0.10%
Accuracy
±2.0%
Temperature
Range
-5 to 130 ºC
Unit
ºC
Resolution
0.1℃
Accuracy
±0.1℃
Measurement
Reading Mode
Auto Read (Fast, Medium, Slow), Timed, Continuous
Reading Prompts
Reading, Stable, Locked
Temp. Compensation
ATC, MTC
Data management
Data Storage
1000 Groups
GLP Features
Yes
Log Management
Yes
Inputs
pH Electrode
BNC(Q9)
DO with Temp. Probe
6-pin Mini-DIN
Conductivity with Temp. Probe
8-pin Mini-DIN
Outputs
USB, RS 232
USB 2.0 flash memory device, printer, PC
Display options
Backlight
Yes
Auto Shutdown
1~60 min, off
IP Rating
IP54
Date and Time
Yes
General
Power
AC Adapter, 100-240V AC input, DC24V output
Dimensions
280×280×130 mm
Weight
2500g (5.51 lb)
Dimensions (Carton)
370×305×330 mm
Weight (Gross)
4 kg