Gas Analyzer
ONLINE DEW POINT METER/ ANALYSER
The Online Dew point meter can be perceived as the temperature at which the water vapor content in a gas arrives at a soaked state. It is one of the approaches to communicate the outright stickiness of a gas. It may very well be seen that the dew point temperature is a unit system for measuring the moisture content of a gas. The dew point meter is an instrument that measures the absolute moisture content of gas dependent on this unit system.
An Embedded microcontroller-based precision instrument to help to ensure optimum operation of drying equipment.Ideal for precise Monitoring of moisture or Dew point in air or gas output from dryers systems or processes. Continuous monitoring of dewpoint results in reduced maintains cost and downtime caused by separated moisture. The main cause of corrosion in pneumatic systems. The analyzer uses a highly accurate Aluminium Oxide sensor and is an economic alternative to the chilled-mirror dew point type Meters. It utilizes embedded micro control-based circuits to give a direct-read out in dew point or other units and other units corresponding to sensor output-based and Psychometric equations. To achieve high accuracy it uses temperature compensation over the complete operational range.
THE SAMPLING SYSTEM CONSISTS OF:
- ISOLATING VALVE
- Drain Valve
- VACUUM PUMP
- DUST FILTER
- FLOW INDICATOR
FEATURES :
SPECIAL FEATURES OF ONLINE DEW POINT ANALYSER :
- Microprocessor based instrument.
- Digital Graphical Display Measuring range ‐80° to +30° C dew
- point & other ranges also available on client requirement.
- Samples compressed air up to 12 Kg/cm.
- Pressure and up to 95°C temperature can be measured directly.
- Quick disconnect fitting, desiccant test.
- Handy and light weight.
- Inbuilt thin film water vapor sensor.
- Optional RS ‐ 485 computer interface & data logger.
ONLINE DEW POINT METER ANALYZER ADDITIONAL FEATURES
- Computer Interface: RS‐485 or USB
- Data Logger: 1 Megabyte, Non‐Volatile Memory
| Model No | VODM series |
| Sampling | Yes Provided,As per customer requirement |
| Ordering Model VODM 4010 | -40 to +30 Deg.C |
| Ordering Model VODM 6010 | -60 to +30 Deg.C |
| Ordering Model VODM 8010 | -80 to +30 Deg.C |
| Ordering Model VODM 9010 | -110 to +30 Deg.C |
| Display | 65K Colour Graphical Touch LCD |
| Operating power | 230 VAC , 50 Hz |
| Analog Output | 4-20 mA/ 0-20V
| Digital Output | RS 485, USB | | Relay Outputs | 1 NO,1NC | | Accuracy | +/- 2 % | | Recommended calibration frequency | Yearly once | | Available Sensor Technologies | Capacitive Thin Film, Aluminium Oxide AL2O3. SHAW blue spot | |
