Back to Top

Hi, Guest!
Clean Sampling Vehicle NCSV-201 Brand Labnics

Clean Sampling Vehicle NCSV-201 Brand Labnics

Update Terakhir 01 / 11 / 2021
Minimal Pembelian 1 Unit



Detail Clean Sampling Vehicle NCSV-201 Brand Labnics

Alat Laboratorium Lingkungan
Clean Sampling Vehicle NCSV-201
Clean Sampling Vehicle NCSV-201 arrives to around ten thousand level of cleanness with respect to GMP standard. Uninterruptible power supply is used with convenient sampling. Work zone is made of stainless-steel frame, inside is made of colourless transparent glass, novel structure easy to observe and the decorative curtain is smooth, vertical and not damaged. The batteries used are interchangeable, safe as well as reliable. The normal working temperature is from 5 �C to 40 �C and the atmospheric pressure is from 86 to 106 kPa. The limit of noise is not more than 63 dB(A).
Get Quote
Method of Use
Additional Information
Dimension of working area (W1×D1×H1)
1030×650×950 mm
Overall dimension (W×D×H)
1200×730×1950 mm
Max. power
800 W
300 kg
Normal working condition
Temperature 5 °C to 40 °C
Relative humidity
≤ 80 %
Atmospheric pressure
86 to 106 kPa
Flexible and reliable
Sample vehicle box body is made from stainless steel or steel plate. The decorative curtain is smooth, vertical and not damaged
Average illumination cannot be less than 86 to 106 kPa
Purifying efficiency
Ten thousand level or hundred thousand level
Average wind speed
0.4 ± 20 % (adjustable)
Not more than 63 dB (A)
X, Y, Z vibration range is not more than 3 µm
Power supply
AC 220 V / 50 Hz
Steel plate varnish / stainless steel
✔ Mains and inverter battery are interchangeable, flexible, safe and reliable
✔ LCD control panel with touch switch and is more intuitive understanding of the work of clean bench
✔ 5 to 10 minutes prior equipment should be used to avoid UV disinfection
✔ Headlamp in installed to ensure that the work environment is bright
✔ Using superfine glass fiber paper as filtering material, offset paper, aluminum film and other materials as fengeban, glued with wood frame aluminum alloy
✔ Working area is stainless steel frame, and the inside surface is of colorless transparent glass, novel structure easy to observe
✔ DC power supply is used for rechargeable up to 8 to 12 hours of continuous work
✔ Airflow volume adjustable system, reliable operation and low energy
Clean Sampling Vehicle is widely used in the field of pharmaceutical, biotechnology, electronics, etc. for the non-contaminated item transfer that can effectively avoid contamination to these items during the transfer.
Method of Use
Move the clean sampling vehicle to the place where sampling is needed to be done
Fix it and connect it to the power supply. Turn on the power supply as well as the fan
Set the voltage to right range (usually 220 V), put sampling barrel in it after clean sampling vehicle works for 15 min
Take sampling barrel away after sampling. Turn off the fan and shut off the power supply
Move sampling vehicle to original place