Back to Top

1
Hi, Guest!

  LOKASI :  Jakarta Timur

  AKTIVITAS :  11/05/2022

BAGIKAN :   

Bagikan :
Kontak Kami  
Jual Alat Lab Penguji Lingkungan 2. Distributor Alat Castle Inc.Indonesia 3.Jual alat General Laboratory 4.Distributor Alat Delta Ohm Indonesia.5.Distributor B
  • Laboao
  • Digital Ultrasonic Thickness Gauge Meter

Digital Ultrasonic Thickness Gauge Meter

Update Terakhir
:
24 / 01 / 2022
Min. Pembelian
:
1 Unit

Harga

CALL
Bagikan
:
Dengan hormat, Kami PT.Mitra Katiga Sejahtera menjual alat laboratorium lingkungan.
I. STAPLEX, SHINAGAWA, NOVA GAS, DELTA OHM,LABTRON,TURNKEY INSTRUMENTS,HAZ DUST
E INSTRUMENT , EPAM-5000 ENVIRONMENTAL DEVICE , LABNICS,GOLD,AIRMETRIC,ASSEMBLAD,ANAPOL,ZHONGAN,KOMYO KITAGAWA,JXCT,TRAWAS
www.mitrakatigasejahtera.com

Detail Digital Ultrasonic Thickness Gauge Meter

Thickness Meter
The LM series ultrasonic thickness gauge developed and produced by our factory adopts the principle of ultrasonic measurement and is an ultra-small measuring instrument. It can measure quickly, without damage and accurately. The instrument can be widely applied to the detection fields of manufacturing, metal processing, chemical industry, commodity inspection and the like, and is suitable for measuring the thickness of various materials which can enable ultrasonic waves to propagate at a constant speed in the interior and can be reflected from the back surface of the ultrasonic waves.

In addition to accurately measuring various plates and various processed parts, it can also monitor various pipelines and pressure vessels in production equipment and monitor their thinning degree after corrosion during use. It is a necessary special instrument for material protection.
FEATURES
1. The working principle: uses the pulse-echo method of double crystal probe

2. Measurement error: ±0.1 mm (less than 10 mm) (±1% H+0.1) (more than 10 mm) Note: H is the thickness of the object to be measured.

3. V path correction: v sound path correction to compensate nonlinearity of bimorph probe

5. Minimum scanning: drag the probe along the surface of the object to be measured, and the instrument can automatically find a place to measure the thinnest thickness.

6. Application software: UmView software is used to transmit, store, analyze and edit documents of measurement data (optional)

7. Has the function of penetrating the coating (LM-1D Only)
Model
LM-1
LM-1D
Measuring range
0.8-300 mm( Depending on the probe, the standard measurement range:1-100mm)
Penetration mode
NO
3-18 mm
Working principle
Pulse echo method
Pulse echo method, Echo echo method
Probe compensation line
A probe compensation line is built in
7 kinds of probe compensation wires are built in and matched with 7 kinds of probes.
Resolution
0.1mm or 0.001in
Display
128× 64 Dot Matrix LCD Display (EL Backlight)
Repeatability
0.1 ㎜
Unit
millimeter or inch
Calibration mode
zero calibration, two-point calibration
The measurement update rate
4Hz
The sound speed range of the material
1000~9999m/s or 0.0394~0.3937in/us
The storage function
divided into 5 arrays, which can store 500 thickness values.
Alarm function
set the thickness limit and give an alarm to the measured value outside the limit.
Sound speed storage
store the sound speed of 5 different materials.
Language
Chinese or English
Communication interface
USB interface or RS232 serial port (optional)
Power supply
two 1.5V AA batteries. When the power is insufficient, there will be a low voltage prompt.
Operating time
alkaline battery can be used for 200 hours (no backlight)
Automatically shut down
after 5 minutes without operation
Working temperature
-10℃ ~+50℃, with special requirements up to -20℃
Size
149*73*32mm
Weight
210g (including battery)
Standard configuration
UM-1 mainframe, standard probe PT-08, instrument box, two alkaline batteries, coupling agent, operation manual, certificate of approval, packing list
Optional accessories
rubber sheath, probes of different measurement standards, probe wires, step test blocks, communication software and cables

Optional probe




Model
PT08
PT06
PT04
ZT12
GT12
Type
Standard
Small crystal tube
Fingertips
Coarse crystal (cast iron)
High temperature
Frequency
5MHZ
7.5MHZ
10MHZ
2MHZ
5MHZ
Contact diameter
11.5mm
8.7 mm
7.3 mm
17 mm
15 mm
Measuring range
0.8~100mm
0.8~30mm
0.7~12mm
4.0~508mm
4.0~80mm
Allowable temperature
-10℃ ~+50℃
-10℃ ~+50℃
-10℃ ~+50℃
-10℃ ~+50℃
Below 480℃




Configuration list
Mainframe


Coupling agent
1
Probe
1
Battery
2
Packing document
1
Instrument seal box
1
Note: If send it by air, not including batteries, it’s an empty bottle for Coupling agent.
Tampilkan Lebih Banyak