Detail BI-650 Online Conductivity Controller Brand Bante
Conductivity Meter
BI-650 Online Conductivity Controller
Industrial online conductivity controller, 1 to 3 points calibration, 4 to 20mA outputs. The meter is suitable for monitoring the conductivity and total dissolved solids (TDS) of the water quality.
Features:
• Economical online conductivity controller comes with a platinum conductivity electrode.
• 1 to 3 points calibration with automatic recognition for conductivity standards.
• Selectable cell constant, temperature coefficient and TDS conversion factor.
• Automatic temperature compensation ensures accurate readings over the entire range.
• Setup menu allows setting the number of calibration points, alarm limits, hysteresis value,
4 to 20mA output, etc.
• Reset function automatically resumes all settings back to the factory defaults.
SpecificationsOrdering InfoOptional AccessoriesPackaging
Model
BI-650
Conductivity
Range
0.01 to 20.00, 200.0, 2000µS/cm, 20.00, 200.0mS/cm
Resolution
0.001, 0.01, 0.1, 1
Accuracy
±1% F.S.
Calibration Points
1 to 3 points
Calibration Solutions
84uS, 1413uS, 12.88mS, 111.8mS
TDS
Range
0 to 10.00, 100.0, 1000ppm, 10.00, 200.0ppt
Resolution
0.01, 0.1, 1
Accuracy
±1% F.S.
TDS Factor
0.1 to 1.0 (default 0.5)
Temperature
Range
0 to 100°C/32 to 212°F
Resolution
0.1°C/0.1°F
Accuracy
±1°C/±1.8°F
Offset Calibration
1 point
Calibration Range
Reading ±10°C
Communication
Signal Output
4 to 20mA
Load
Max. 500Ω
Low or High Alarm
0.02uS/cm to 20.0mS/cm, selectable
Communication Interface
RS485
Connection Terminals
Detachable screw terminals
General Specifications
Temperature Compensation
0 to 100°C/32 to 212°F, automatic
Temperature Coefficient
Linear (0.0 to 10.0%/°C)
Reference Temperature
25°C
Cell Constant
K=0.1, 1, 10
Environmental Conditions
Ambient temperature <60°C, relative humidity <80%
Power
DC24V
Dimensions
96(L)×96(W)×75(H)mm
Weight
350g
